[email protected]

Reply promptly

+86 18816817812

24/7 Customer Support

ATV312HU15M2 variable speed drive ATV312 - 1.5kW - 3.2kVA - 90W - 200..240 V- 1-phase supply

Or online message

ATV312HU15M2 variable speed drive ATV312 - 1.5kW - 3.2kVA - 90W - 200..240 V- 1-phase supply

  • Characteristics

    Main
    range of product
    Altivar 312
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    assembly style
    With heat sink
    component name
    ATV312
    motor power kW
    1.5 kW
    motor power hp
    2 hp
    [Us] rated supply voltage
    200…240 V (- 15…10 %)
    supply frequency
    50…60 Hz (- 5…5 %)
    Phase
    Single phase
    line current
    13.3 Afor 240 V
    15.8 Afor 200 V, 1 kA
    EMC filter
    Integrated
    apparent power
    3.2 kVA
    maximum transient current
    12 Afor 60 s
    power dissipation in W
    90 W at nominal load
    speed range
    1…50
    asynchronous motor control profile
    Sensorless flux vector control with PWM type motor control signal
    Factory set : constant torque
    electrical connection
    L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.01 in² (5 mm²) AWG 10
    Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1…LI6 terminal 0 in² (2.5 mm²) AWG 14
    supply
    Internal supply for logic inputsat 19…30 V, <= 100 mAfor overload and short-circuit protection
    Internal supply for reference potentiometer (2.2 to 10 kOhm)at 10…10.8 V, <= 10 mAfor overload and short-circuit protection
    communication port protocol
    CANopen
    Modbus
    IP degree of protection
    IP20 on upper part without cover plate
    IP21 on connection terminals
    IP31 on upper part
    IP41 on upper part
    option card
    CANopen daisy chain communication card
    DeviceNet communication card
    Fipio communication card
    Modbus TCP communication card
    Profibus DP communication card
    Complementary
    supply voltage limits
    170…264 V
    network frequency
    47.5…63 Hz
    prospective line Isc
    1 kA
    continuous output current
    8 A at 4 kHz
    output frequency
    0…500 kHz
    nominal switching frequency
    4 kHz
    switching frequency
    2…16 kHz adjustable
    transient overtorque
    170…200 % of nominal motor torque
    braking torque
    100 % with braking resistor continuously
    150 % without braking resistor
    150 % with braking resistor for 60 s
    regulation loop
    Frequency PI regulator
    motor slip compensation
    Automatic whatever the load
    Suppressable
    Adjustable
    output voltage
    <= power supply voltage
    tightening torque
    10.62 lbf.in (1.2 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
    5.31 lbf.in (0.6 N.m) Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1…LI6
    insulation
    Electrical between power and control
    analogue input number
    3
    analogue input type
    AI1 configurable voltage 0…10 V, input voltage 30 V max, impedance 30000 Ohm
    AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 Ohm
    AI3 configurable current 0…20 mA, impedance 250 Ohm
    sampling duration
    AI1, AI2, AI3 8 ms analog
    LI1…LI6 4 ms discrete
    response time
    AOV, AOC 8 ms analog
    R1A, R1B, R1C, R2A, R2B 8 ms discrete
    linearity error
    +/- 0.2 % output
    analogue output number
    1
    analogue output type
    AOC configurable current 0…20 mA, impedance 800 Ohm, resolution 8 bits
    AOV configurable voltage 0…10 V, impedance 470 Ohm, resolution 8 bits
    discrete input logic
    (LI1…LI4) logic input not wired, < 13 V (state 1)
    (LI1…LI6) negative logic (source), > 19 V (state 0)
    (LI1…LI6) positive logic (source), < 5 V (state 0), > 11 V (state 1)
    discrete output number
    2
    discrete output type
    (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles
    (R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles
    minimum switching current
    R1-R2 10 mAat 5 V DC
    maximum switching current
    R1-R2 on inductive load, 2 A at 250 V AC, (cos phi = 0.4, and L/R = 7 ms)
    R1-R2 on inductive load, 2 A at 30 V DC, (cos phi = 0.4, and L/R = 7 ms)
    R1-R2 on resistive load, 5 A at 250 V AC, (cos phi = 1, and L/R = 0 ms)
    R1-R2 on resistive load, 5 A at 30 V DC, (cos phi = 1, and L/R = 0 ms)
    discrete input number
    6
    discrete input type
    (LI1…LI6) programmable, 24 V 0…100 mA with PLC, impedance 3500 Ohm
    acceleration and deceleration ramps
    S, U or customized
    Linear adjustable separately from 0.1 to 999.9 s
    braking to standstill
    By DC injection
    protection type
    Input phase breaks drive
    Line supply overvoltage and undervoltage safety circuits drive
    Line supply phase loss safety function, for three phases supply drive
    Motor phase breaks drive
    Overcurrent between output phases and earth (on power up only) drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor
    insulation resistance
    >= 500 mOhmat 500 V DC for 1 minute
    local signalling
    1 LED red drive voltage
    Four 7-segment display units CANopen bus status
    time constant
    5 ms for reference change
    frequency resolution
    Analog input 0.1…100 Hz
    Display unit 0.1 Hz
    connector type
    1 RJ45 Modbus/CANopen
    physical interface
    RS485 multidrop serial link
    transmission frame
    RTU
    transmission rate
    10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
    4800, 9600 or 19200 bps Modbus
    number of addresses
    1…247 Modbus
    1…127 CANopen
    number of drive
    127 CANopen
    31 Modbus
    marking
    CE
    operating position
    Vertical +/- 10 degree
    outer dimension
    143 x 105 x 150 mm
    184 x 149 x 145 mm
    200 x 180 x 144 mm
    height
    5.63 in (143 mm)
    width
    4.21 in (107 mm)
    depth
    5.98 in (152 mm)
    product weight
    3.97 lb(US) (1.8 kg)
    Environment
    dielectric strength
    2040 V DC between earth and power terminals
    2880 V AC between control and power terminals
    electromagnetic compatibility
    Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
    Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
    Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
    1.2/50 µs – 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
    standards
    IEC 61800-3
    IEC 61800-5-1
    product certifications
    CSA
    UL
    GOST
    DNV
    NOM
    C-Tick
    pollution degree
    2
    protective treatment
    TC
    vibration resistance
    1.5 mm (f = 3…13 Hz) conforming to EN/IEC 60068-2-6
    1 gn (f = 13…150 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation conforming to IEC 60068-2-3
    5…95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for storage
    -13…158 °F (-25…70 °C)
    ambient air temperature for operation
    14…122 °F (-10…50 °C) without derating with protective cover on top of the drive
    14…140 °F (-10…60 °C) with derating factor without protective cover on top of the drive
    operating altitude
    <= 3280.84 ft (1000 m) without derating
    3280.84…6561.68 ft (1000…2000 m) with current derating 1 % per 100 m
    Ordering and shipping details
    Category
    22152 – ATV312 / ATV32 (.25 – 7.5 HP)
    Discount Schedule
    CP4B
    GTIN
    00785901593881
    Nbr. of units in pkg.
    1
    Package weight(Lbs)
    4.54
    Returnability
    Y
    Country of origin
    ID
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    Compliant  – since  0913  –  Schneider Electric declaration of conformity Schneider Electric declaration of conformity
    REACh
    Reference not containing SVHC above the threshold
    Product environmental profile
    AvailableProduct Environmental Profile
    Product end of life instructions
    AvailableProduct Environmental Profile

    ATV312H018M2
    ATV312H037M2
    ATV312H055M2
    ATV312H075M2
    ATV312HU11M2
    ATV312HU15M2
    ATV312HU22M2
    ATV312H037N4
    ATV312H055N4
    ATV312H075N4
    ATV312HU11N4
    ATV312HU15N4
    ATV312HU22N4
    ATV312HU30N4
    ATV312HU40N4
    ATV312HU55N4
    ATV312HU55N4
    ATV312HU75N4
    ATV312HD11N4
    ATV312HD15N4
Scroll to Top