[email protected]

Reply promptly

+86 18816817812

24/7 Customer Support

Schneider LXM23AU15M3X motion servo drive - Lexium 23 - single phase 200...255 V - 1.5 kW - CAN

Or online message

Schneider LXM23AU15M3X motion servo drive - Lexium 23 - single phase 200...255 V - 1.5 kW - CAN

Characteristics

Main
range of product
Lexium 23 Plus
product or component type
Motion servo drive
device short name
LXM23
Complementary
format of the drive
Book
network number of phases
3 phases
Single phase
[Us] rated supply voltage
220 V (- 10…15 %) single phase
220 V (- 20…15 %) 3 phases
supply voltage limits
200…255 V single phase
170…255 V 3 phases
supply frequency
50/60 Hz (- 5…5 %)
network frequency limits
47.5…63 Hz
continuous output current
8.3 A
continuous power
1500 W at 220 V
nominal power
1.5 kW at 220 V
leakage current
> 3.5 mA
output voltage
<= power supply voltage
electrical isolation
Between power and control
type of cable
Twisted shielded pairs cable (single or double) at 0…55 °C
electrical connection
Terminal 1.3 mm² / AWG 16 (L1-L2)
Terminal 2.1 mm² / AWG 14 (R, S, T)
Terminal 2.1 mm² / AWG 14 (PA/+, PBe)
Terminal 0.82 mm² / AWG 16 (U, V, W)
tightening torque
1.4 N.m (PE (ground))
discrete input number
8 programmable
discrete input type
Programmable (CN1)
discrete input voltage
12…24 V DC logic
discrete input logic
Positive or negative logic (CN1)
discrete output number
5
discrete output type
(CN1) logic output 12…24 V DC
discrete output voltage
12…24 V DC
analogue input number
2
absolute accuracy error
0.01 %
analogue input type
Voltage analog input (T_REF) – 10…10 V input impedance: 10 kOhm
Voltage analog input (V_REF) – 10…10 V input impedance: 10 kOhm
control signal type
Servo motor encoder feedback
protection type
Overcurrent for motor
Overvoltage for motor
Undervoltage for motor
Overheating for motor
Overload for motor
Overspeed for motor
Abnormal pulse control command for drive
Against reverse polarity for inputs signal
Against short-circuits for outputs signal
communication interface
Integrated CANopen
Integrated CANmotion
connector type
RJ45 (CN3) for CANopen, CANopen Motionbus
method of access
Slave
physical interface
2-wire RS485 multidrop for Modbus
transmission rate
125 kbps – for bus length of > 250…500 m for CANopen, CANmotion
250 kbps – for bus length of > 100…250 m for CANopen, CANmotion
500 kbps – for bus length of > 4…100 m for CANopen, CANmotion
1 Mbps – for bus length of <= 4 m for CANopen, CANmotion
number of addresses
1…127, addresses for CANopen, CANmotion
status LED
1 LED function: charge LED
signalling function
Servo status and fault codes for five 7-segment display units
marking
CE
type of cooling
Integrated fan
operating position
Vertical
width
85 mm
height
162 mm
depth
180 mm
product weight
2.2 kg
Environment
EMC filter
Without EMC filter
electromagnetic compatibility
EMC immunity with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2
EMC immunity (level 3) conforming to EN/IEC 61000-4-2
EMC immunity (level 3) conforming to EN/IEC 61000-4-3
EMC immunity (level 3) conforming to EN/IEC 61000-4-5
EMC immunity (level 4) conforming to EN/IEC 61000-4-4
Conducted and radiated emissions with additional EMC filter conforming to EN/IEC 61800-3 environments 1 and 2 category C2, C3
standards
EN/IEC 61800-5-1
product certifications
C-Tick
CULus 508
IP degree of protection
IP20 for on upper part without protective cover
IP41 for on upper part with protective cover
vibration resistance
0.075 mm peak to peak (f = 10…57 Hz) conforming to IEC 60068-2-6
1 gn (f = 57…150 Hz) conforming to IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
relative humidity
Class 3K3 (5 to 85 %) without condensation or dripping water conforming to IEC 60721-3-3
ambient air temperature for operation
0…55 °C conforming to UL
ambient air temperature for storage
-20…65 °C
operating altitude
> 1000…2000 m with continuous power derating of 1 % per 100 m
<= 1000 m without derating
Offer Sustainability
Sustainable offer status
Green Premium product
RoHS (date code: YYWW)
Compliant  – since  0943  –  Schneider Electric declaration of conformity Schneider Electric declaration of conformity
REACh
Reference not containing SVHC above the threshold
Product end of life instructions
Available

 

LXM23DU01M3X Lexium 23 D  0.1 Kw
LXM23DU02M3X Lexium 23 D  0.2 Kw
LXM23DU04M3X Lexium 23 D  0.4 Kw
LXM23DU07M3X Lexium 23 D  0.75 Kw
LXM23DU10M3X Lexium 23 D  1 Kw
LXM23DU15M3X Lexium 23 D  1.5 Kw
LXM23DU20M3X Lexium 23 D  2 Kw
LXM23DU30M3X Lexium 23 D  3 Kw
LXM23DU45M3X Lexium 23 D  4.5 Kw
LXM23DU55M3X Lexium 23 D  5.5 Kw
LXM23DU75M3X Lexium 23 D  7.5 Kw
LXM23AU01M3X Lexium 23 A  0.1 Kw
LXM23AU02M3X Lexium 23 A  0.2 Kw
LXM23AU04M3X Lexium 23 A  0.4 Kw
LXM23AU07M3X Lexium 23 A  0.75 Kw
LXM23AU10M3X Lexium 23 A  1 Kw
LXM23AU15M3X Lexium 23 A  1.5 Kw
LXM23AU20M3X Lexium 23 A  2 Kw
LXM23AU30M3X Lexium 23 A  3 Kw
LXM23AU45M3X Lexium 23 A  4.5 Kw
LXM23AU55M3X Lexium 23 A  5.5 Kw
LXM23AU75M3X Lexium 23 A  7.5 Kw

Scroll to Top