Description

  • Sensor/ detection principle Through-beam photoelectric sensor
    Dimensions (W x H x D) 11 mm x 31 mm x 20 mm
    Housing design (light emission) Rectangular
    Sensing range max. 0 m … 15 m
    Sensing range 0 m … 12 m
    Type of light Visible red light
    Light source LED 1)
    Light spot size (distance) Ø 1,500 mm (12 m)
    Angle of dispersion Approx. 7.2°
    Wave length 680 nm
    Adjustment Potentiometer, 270°
    • 1) Average service life: 100,000 h at TU = +25 °C.
  • MECHANICS/ELECTRONICS
    Supply voltage 10 V DC … 30 V DC 1)
    Ripple ± 10 % 2)
    Power consumption, sender ≤ 15 mA 3)
    Power consumption, receiver ≤ 20 mA 3)
    Switching output PNP
    Switching mode Light/dark switching
    Switching mode selector Selectable via light/dark rotary switch
    Signal voltage PNP HIGH/LOW UV – 1,8 V / ca. 0 V
    Output current Imax. 100
    Response time ≤ 0.5 ms 4)
    Switching frequency 1,000 Hz 5)
    Angle of reception Approx. 15°
    Connection type Connector M8, 4-pin
    Circuit protection A 6)

    B 7)

    D 8)

    Weight 18 g
    Housing material Plastic, ABS/PC/POM
    Optics material Plastic, PMMA
    Enclosure rating IP65
    Items supplied 2 Stainless steel mounting brackets (1.4301/304) BEF-W100-A
    Ambient operating temperature –25 °C … +55 °C
    Ambient storage temperature –40 °C … +70 °C
    • 1) Limit values when operated in short-circuit protected network: max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) Signal transit time with resistive load.
    • 5) With light/dark ratio 1:1.
    • 6) A = VS connections reverse-polarity protected.
    • 7) B = inputs and output reverse-polarity protected.
    • 8) D = outputs overcurrent and short-circuit protected.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

X